SKU: 83604980592
growing areca palm outdoors

growing areca palm outdoors Areca Palm

Sale price$22.87 Regular price$25.41
Save 10%

Pay in installments of $6.35 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Oct 4 - Oct 9

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

growing areca palm outdoors Areca PalmAreca Palm The Areca palm trees are a favorite palm for privacy, screening and garden backdrops in many Cape Coral landscaping projects. We recommend using the Butterfly Palm Trees as a living fence to provide privacy from neighbors, or block the view from the street into your home. Once they reach a taller height, with a little trimming they can be thinned out to display their bamboo looking trunks. Either left completely full and lush, or a little

Areca Palm

The Areca palm trees are a favorite palm for privacy, screening and garden backdrops in many Cape Coral landscaping projects. We recommend using the Butterfly Palm Trees as a living fence to provide privacy from neighbors, or block the view from the street into your home. 

Once they reach a taller height, with a little trimming they can be thinned out to display their bamboo-looking trunks. Either left completely full and lush, or a little manicured, the Areca palm tree is a beautiful addition to a tropical landscape.

  • These palms are a great choice for natural privacy screening.
  • Not just another pretty face, the dramatic areca palm can double duty as a spectacular tropical privacy screen.
  • It is sometimes called the "Butterfly Palm"-because they are full and dense.
  • Areca palms are slow to moderate growers for sun and shade and can reach heights of 15 to 20 feet. 
  • Zone 10 is best, though winter in warmers areas or Zone 9B that border 10A, you can use an Areca in a protected spot. You may see leaf tip burn after most winters, even in Zone 10. Areca are clustering palms.
WE ONLY SHIP TO LOCAL FL COUNTIES (Hillsborough, Pinellas, Manatee and Pasco Counties ONLY)

    More Details

      

    Advantages:

    Easy To Grow

    Low Maintenance

    Good For Containers

      Grows Best:

        Landscape

        House Plant

        House Plant

      Ideal position:

      Full Sun

      6 + Hours best

      Growth Outlook:

      Height : 10-30

      Wide: 8 - 10'

      Growth Rate: Fast

      Plant Spacing: 12' - 18'

      Pet Friendly - yes

      Toxicity: Safe for pets

      Caring For:

      Position Water Temps Food

       

      Caring for an Areca Palm tree involves several important steps to ensure its health and vitality:

      1. Sunlight: Areca Palms thrive in bright, indirect sunlight. Place your palm near a window with filtered light or provide it with dappled shade outdoors. Avoid exposing it to direct sunlight, as it can scorch the leaves.

      2. Watering: Keep the soil consistently moist but not waterlogged. Water your Areca Palm thoroughly when the top inch of soil feels dry to the touch. Ensure proper drainage to prevent root rot. During winter, reduce watering frequency slightly as the plant's growth slows down.

      3. Humidity: Areca Palms prefer high humidity levels. Mist the leaves regularly with water or place a humidifier nearby to create a humid environment. This helps prevent the tips of the leaves from turning brown.

      4. Fertilization: Feed your Areca Palm with a balanced, water-soluble fertilizer specifically formulated for indoor plants. Apply the fertilizer every two to three months during the growing season (spring and summer). Follow the package instructions for proper dilution and application.

      5. Pruning: Remove any yellow or brown fronds as they age or become damaged. Trim off any dead or brown leaf tips to maintain the plant's appearance. Avoid excessive pruning, as it can stress the palm.

      6. Pests: Monitor your Areca Palm for common pests like spider mites and mealybugs. If you notice any infestations, treat them promptly with an appropriate insecticidal soap or neem oil spray.

      7. Repotting: As the Areca Palm grows, it may require repotting every two to three years. Choose a pot that is one size larger and use well-draining soil. Repotting in spring allows the palm to establish itself before the active growing season.

      By following these care guidelines, you can ensure that your Areca Palm remains healthy, vibrant, and a beautiful addition to your indoor or outdoor space. Regular attention to watering, light, and humidity will help your palm thrive for years to come.

      Shipping Notes
      • Free Standard Shipping on $100+ Orders to the USA.
      • Except Preorder products are shipped in 48 hours.
      • Delivery to the USA:
      1. Standard Shipping : 3-10 business days
      • If time is of the essence, please consider selecting expedited delivery for faster service.
      Exchange/Return Notes
      • We offer a 30-day return/exchange service after receiving.
      • Final sale items are not eligible for returns or exchanges.
      • To process your return/exchange, please contact us at [email protected]
      • Please click here for more details>>> Return & Exchange Policy
      SKU: 83604980592

      Discover Niche Categories That Outsell growing areca palm outdoors

      Top-Converting Item to Boost Your Average Order

      4.2 ★★★★★
      Based on 29 reviews
      Sort
      Highest Rating
      Newest First
      Oldest First
      Product Reviews
      C
      Verified Purchase
      Chris
      Battle Creek, US
      ★★★★★ 5
      Prefect fit
      Size: CA12290-Premium, Size: CA12290-Premium
      Excellent product! OEM Replacement. If you are buying for horse power gains. You will not really notice any difference
      WAS THIS REVIEW HELPFUL?YesReportShare
      Reviewed in the United States on February 18, 2025
      B
      Verified Purchase
      Brendon MO
      Chelsea, US
      ★★★★★ 5
      K and N is the best
      Size: CA12290-Premium
      In my opinion, you can’t buy a better air filter. Been buying them for all my cars since the 1990s.
      WAS THIS REVIEW HELPFUL?YesReportShare
      Reviewed in the United States on December 8, 2024
      S
      Verified Purchase
      Steve
      Omaha, US
      ★★★★★ 2
      Does not fit 2023 Honda Accord as it says in the title
      Size: CA12290-Premium, Size: CA12290-Premium
      Does not fit 2023 Honda Accord as it says in the title. Seems like good quality otherwise.
      WAS THIS REVIEW HELPFUL?YesReportShare
      Reviewed in the United States on October 3, 2024
      P
      Verified Purchase
      Philip and Lucy
      Grantham, US
      ★★★★★ 5
      Fits Toyota 2010 FJ cruiser
      Perfect fit for a Toyota 2010 FJ cruiser. Install might have been the easiest cabin filter I've done in any car that new. Remove glove box, pull out the cover and replace it. Fits great and takes odors out from it sitting for 6 months in the driveway. No notice to less airflow when on any level of fan speed.
      WAS THIS REVIEW HELPFUL?YesReportShare
      Reviewed in the United States on May 30, 2026
      S
      Verified Purchase
      S
      Los Angeles, US
      ★★★★★ 5
      Comparison with POTAUTO filter: Very similar but cheaper
      I bought a POTAUTO MAP 1033C and EPAuto CP846 cabin air filter to compare them for use in my 09 Legacy (gen 4). They both seemed comparable and are cheaper than most other, similar filters, though the POTAUTO was and still is ~33% more expensive than the EPAuto. Both seem built well-enough, considering they're only being used as relatively low-flow cabin filters. That said, the EPAuto is slightly better, mainly due to the white trim piece being unattached along one side on the bottom of the POTAUTO filter. Almost certainly nothing that will affect its performance or longevity, but it is interesting considering it's the more expensive of the two. However, it must be kept in mind that this is an incredibly small sample size. In one of my very scientific tests (/s), I held them up side by side and looked through them toward the sun (obviously being careful) to judge thickness/density and uniformity. Neither had any thin spots that I noticed, and they were pretty similar overall. One of them blocked slightly more light than the other, indicating more filtration, but I unfortunately don't remember which one. I feel like it was the EPAuto, but I don't really want to speculate as I could very well be wrong. What I do remember is that the difference was so minor that all else being equal, it wouldn't justify the cost difference between the two. In other words, even if the POTAUTO were the slightly better one, it wouldn't be worth the extra few dollars for the minimal amount of extra filtration. In another test, I compared the filters to each other and the old filter (which I'm pretty sure was OEM, but certainly not a charcoal filter, so it was significantly thinner) by blowing air from a compressor through them. I held the nozzle at roughly the same distance from each on one side of the filters, and I held my other hand at roughly the same distance from each on the other side. The old filter, unsurprisingly, let much more air flow through. Both charcoal filters were much more restrictive due to their extra thickness, leading me to feel much less air coming through. Both were roughly the same. Both filters also held up just fine to the strong blasts of air. I bought a couple other filters that I was going to cut to fit to use one or both with these filters as a pre-filter and/or additional charcoal layer. After the airflow test, I decided against this, as these are a lot more restrictive than OEM already, and I didn't want to push it, since that could at best cause issues with getting good airflow into the car, and at worst could damage the blower. If not for the fact many, many people have been using these and similar filters for a long time without apparent issue caused by this, I would hesitate to even use these. I haven't noticed a decrease in the airflow, but it's doubtful I would since I rarely turn the fan up past the first couple settings (usually have it on the first) if I have it running at all, and I have the center vents pulled out (to access the inside of the dash) which causes the flow at the vents to be reduced slightly. TL;DR - Both the POTAUTO and EPAuto charcoal filters appear to be a good choice, with the EPAuto having a slight edge on build quality (based on my limited sample size of one each) and a cheaper price. Filtration appears to be very similar between the two, certainly not enough of a difference to warrant the extra price for the POTAUTO over the EPAuto. Flow is significantly more restrictive than OEM filter but doesn't appear to be an issue. I give the EPAuto 5 stars and the POTAUTO 4 stars, only because the value of the POTAUTO is a good bit less (very similar or possibly even inferior quality for 33% more money). I can't speak to their longevity or performance, but I don't imagine either should prove to be an issue. -------------------------------------------------- As a side note relating specifically to the Legacy: replacing the cabin filter in this car is a PITA. It's not overly difficult per se, but a serious pain and certainly not something you're going to do when you have a spare few minutes. I'd rate it probably around a 3.5/10 in difficulty and a 7/10 for annoyance. While you can sort of access it by removing the manual compartment, you can't remove the tray through that. So you need to actually take the whole glove box out, which requires removing the side panel, unhooking the string/loop that keeps it from falling all the way down, and removing a few plastic screws, which can be a bit of a pain (and apparently Subaru loves them since they're all over the car). A stubby Philips driver will be helpful. Once you have the glove box out of the way, you have to unscrew several more of those plastic screws to remove the plastic cover between the glove box and the filter. This hole is where you gain access. Be careful when removing the old filter as loose dirt and debris may fall out and make a bit of a mess. You don't really want to get any in the fan below it if you can help it. Reverse the steps to reassemble it, and remember to reattach the string. Getting the glove box back in its track can be a bit of a challenge; in my experience from doing it multiple times I've found you sort of half force it and half don't. That is, it'll likely offer some resistance even if it's lined up, so if you try to baby it you'll probably be there a while, but also play with the alignment a bit to see if you can get it without marring up the tab and the slot on the right side too much. All in all, expect to spend anywhere from 15-45 minutes on this, and make sure you have a standard length as well as a shorter or stubby Philips screwdriver. I have to say, when it comes to air filters, this car is horrible. The air intake filter is a pain to change, too--much worse than most if not all other cars I've done. -------------------------------------------------- Keywords: Subaru Legacy, fourth gen, fourth generation, 4th gen, 4th generation, 03, 04, 05, 06, 07, 08, 09, 2003, 2004, 2005, 2006, 2007, 2008, 2009
      WAS THIS REVIEW HELPFUL?YesReportShare
      Reviewed in the United States on September 29, 2017

      recommand products